Envizio Pro

The Envizio PRO is an enhanced version of our popular Envizio Plus. The PRO carries all the same capabilities of the Plus with the addition of a larger 6.4” color screen, integrated DGPS receiver as well as dual product CANbus control.

FEATURES

3-D Last Pass guidance
Integrated DGPS receiver, also available without receiver
On-screen guidance can interface to a Raven RGL light bar
Two product Raven CAN interface
- o Flow control – liquid, granular, NH3, direct injection
Single product variable rate control (optional) Interface to Raven controller Wireless communication (optional) CANbus AutoBoom – Automatic Boom Height Control (optional)
- Full setup and control of the Raven PowerGlide Plus and UltraGlide AutoBoom systems can be performed from the Envizio PRO
CANbus AccuBoom – Automatic Boom Section Control (optional)
- Setup and monitor boom section control, create no-spray-zones and boundaries from Envizio PRO
Creates color coverage & as-applied rate maps on the go
Creates field-boundary maps
USB thumb drive memory transfer
Data log information to internal memory
Data saved in Shapefile format for use in most major software packages
Simple product application report & map
Select between English and Metric units
Spinner rpm readout & control (optional)
PWM Spinner control capable (optional)
SmarTrax and QuickTrax assisted steering capable
Supports standard, fast close, and PWM product control valves
Boom Position Indicator – The width and relative position of the coverage booms are shown on the coverage map. This feature makes it easier to identify potential overlaps and helps in lining up a new swath.
Guidance AB Lines – AB lines can be saved for each field and recalled at a later date.
Tilt Sensor Setup – Setup of the Raven TM1 Tilt Sensor can be performed from the Envizio PRO.
CAN Alarm Auto Clear – Off Rate and Low Limit CAN alarms now automatically clear from the Envizio PRO screen when the alarm condition is no longer present.
Reset Field Totals – Field acreage and volume totals can now be reset while in a job.
Simplified Setup including:
- Simplified Boom Setup – Simply enter the number of booms and boom widths and the Envizio PRO automatically calculates boom center locations. A simplified summary screen display boom setting and allows quick access to modify boom settings.

Hardware Specifications

Display: 6.5” diagonal measure, 256 color, 480x640 resolution sunlight readable LCD
Touch screen: 6.5” 5-wire resistive technology touch screen
Operating System: Microsoft Windows CE
Processor: 32-bit 800 Mhz Intel Celeron M processor
Memory: 256 MB RAM, 512 MB internal storage
Integrated DGPS sub-meter receiver, SBAS correction standard, e-Dif optional
Available without internal DGPS receiver
4 USB data transfer ports
Input/Output: 2 CANbus 2.0B, 3 serial RS232, Ethernet, DGPS output
Enclosure: Engineered thermoplastic ABS/Polycarbonate blend with high impact and chemical resistance properties
Voltage Range: 9V to 32VDC reverse polarity protected
Temperature: -20C to +50C
Dimensions: 8.4” W x 6.3” H X 3.3”D (213mm x 160mm x 84 mm)
Weight: 3.5 lbs (1.59 Kg)

Envizio PRO Options

AccuBoom can help eliminate skips and overlaps in your field. By monitoring where the sprayer or spreader has applied, AccuBoom automatically turns boom sections on when traveling into areas that have not been covered. It will also turn boom sections off when encountering previously applied areas or "No Spray Zones" such as waterways.

No Spray Zones No Spray Zone 2 Sprayed Area

Autoboom allows you to spray faster and more accurately by detecting changes in ground height and adjusting your boom height automatically. Not only can you decrease driver fatigue and wear and tear on your machine, but you increase the accuracy and coverage of the application. It’s a simple one-touch operation, allowing you to just sit back and drive.

Autoboom 1 Autoboom 2